Asphaltene Removal – Finding The Right Preventative Product
Find out the uses of the product and how to apply it.
You should know that XYSOl is a 100% petroleum-based, product made for the fractionation of plants; this is something that you need to know. You can’t find any source of this product because it comes from one place only. This product has a lot of natural aromatic hydrocarbons that are the best form of solvents in the oil industry; this is a product that can make millions.
You also have to understand that feedstock of XYSOL because this 100% petroleum-based product is produced from a feedstock that can only be found in two fields in the world. There is no other feedstock that can create XYSOL because they do not have the composition to manufacture the product. The production of XYSOL has led to the lighter fractions as well as the heavy fractions to be removed which means this product is seriously more important than these two. The lighter fractions are compounds that will cause the removal of asphaltenes when it is mixed with the asphaltenitic crudes. This means that products that have these fractions need to be avoided for treatment in things that have a very high percentage of asphaltenes. Most of the crudes in a certain area contain a lot of asphaltenes and to have these light fractions will destroy it. Crude oil that has more than 0.5% of asphaltene in it can be affected by the light fractions and will be susceptible to what people know as asphaltene precipitation when the oil is seen to have C7 or lighter fractions; the pressure as well as temperature, acid, pump shear and a lot more will be affected. The heavy fractions are removed to make the XYSOl penetrate the wax and asphaltene deposits easily.
Make sure you know how to use such a product before you get some for your own use.
The pumping wells will remove the waxes and asphaltenes from the tubing and the use of the rod strings by batching the injections into it.
Flowing oil and gas wells will usually help the injection flow through the annulus easily.
The flowline pressure reduces the paraffin or asphaltene accumulation which usually continuous injection helps with the upstream flowline.
You have to know all these things before you even try doing it yourself because this product is quite dangerous to handle if you don’t know how to use it. The whole point of using XYSOL is to remove the Asphaltene in the places that they should not be in. This is why you have to do your research and learn how to effectively use the product to avoid
Asphaltene removal is not going to be easy without XYSOL and that is a fact that you have to understand because if you do it without this product, you will have no luck with it for sure. If you want to learn how to use and get XYSOL, you have to do your homework and research about it.